Jaguar IRS Rear
Alxe Jacking System
Anyone
who has fitted a Jaguar rear axle will know how top heavy and difficult
it is. I decided to make a jacking system. Using 2 standard car jacks
welded to a reinforced diff base plate and mounted on a base and sled
system.
Now I can lower and refit the axle
on my own. It used to take 3
of us!
The
2 jacks allow height adjustment of each
side. The base has been tilted to match the angle of the body during
removal and
fitting
I
would not say it was a joy to remove
the rear end but it is so much easier and not a job I now dred!
Since
I had used the base plate to make
the platform. I made a replacement out of alloy.
